First of all, silicon a crylic-acid elastic thick film coating is better than granite in its bright and colorful luster, and unity and homogeneity of exterior decoration. 首先硅丙弹性厚膜涂料的色泽丰富多彩,外墙的统一性和均一性也要好于花岗岩。
Including: elastic coating, negative ion coating, high optical coatings, insulation and paint. 包括:弹性涂料,负离子涂料、高光涂料,以及保温涂料。
The Yongda Hafu Mult-colors and Elastic polymer waterproof coating is introduced and its construction scheme and the construction effect are described and analyzed detailedly. 本文对永大哈弗聚氨酯彩弹防水涂料的性能进行了简要的介绍,并针对该种涂料应用中的施工方案和施工效果进行了细致的描述和分析。
The results show that both the maximum circumferential stress and stress intensity factor are increasing as the elastic modulus of the coating is increasing. 结果表明,随着涂层材料弹性模量的增大,切口尖端附近的最大周向应力和应力强度因子均增大;
Charateristics, raw materials, formula, manufacturing process, properties and operational application of the high build acrylate elastic waterproof coating are described. 介绍了厚质丙烯酸酯弹性防水涂料的特点、采用的原材料、配方、生产工艺、技术性能和施工应用。
The Performance of the Mult-colors and Elastic Polyurethane Waterproof coating and Its Application; Primary Studies on the Materials and Technology of the Painted Sculptures from Houtu Temple in Shanxi Province 聚氨酯彩弹新型防水材料研究及工程应用山西省介休市后土庙彩塑制作材料及工艺初探
Last but not the least, silicon a crylic-acid elastic thick film coating is greatly lighter than granite, hence the construction speed is faster. 其三,硅丙弹性厚膜涂料自身重量大大低于花岗岩,其施工也更比花岗岩快捷。
In general, silicon a crylic-acid elastic thick film coating is the perfect choice for exterior decoration. 总之,硅丙弹性厚膜涂料是目前外墙装饰较为理想的首选产品。
The Application of Elastic Polymer Cement Waterproofing Coating in Maintenance Engineering 弹性高分子水泥防水涂料在维修工程上的应用
Study has been made on synthesis and preparation of aqueous polyurethane ( polyurethane/ polyacrylate) elastic resin and its architectural waterproof coating. 研究水性聚氨酯(PU)弹性树脂、水性聚氨酯/丙烯酸酯(PU/PA)复合弹性树脂及其建筑防水涂料的合成与制备。
Environmental protection type elastic building waterproof decorative coating 环保型弹性建筑防水装饰涂料
Success has been made through actual test and application in patching steel oil tanks untorched by means of brushing elastic polyurethane coating. 应用涂刷弹性聚氨酯涂料的方法解决钢油罐不动火修补,通过实例试验应用取得成功。
Distributions of hardness and elastic modulus in the coating were determined by nano-indentation. 借助纳米硬度计测定了涂层的硬度和模量。
Prepartion and Study of Core-Shell Emulsion for Elastic Exterior Coating 弹性外墙涂料用核-壳乳液制备研究
Study of impact friction and its influence on the erosion behavior of elastic coating 冲击摩擦及其对弹性涂层冲蚀率的影响研究
Elastic coating materials of organic compound and be used to repairing wearing surface of water turbine transition parts 水轮机过流件磨蚀面修复有机复合弹性涂层材料的研究
Development of Polyurethane-asphalt Elastic Water-proof Coating 聚氨酯-沥青弹性防水涂料的研制
With the increase of the elastic modulus, the shear stress on the surface may also increase while that of interfaces lies on the difference of elastic modulus between the coating and the substrate; 膜层弹性模量的增加,将使表面处的最大剪切应力随之增加,而界面处的最大剪切应力还要取决于膜层与基体间的弹性模量的差值;
Study and preparation of aqueous polyurethane elastic resin and its architectural waterproof coating 水性聚氨酯弹性树脂及其建筑防水涂料的制备与研究
Development of Elastic Waterproof F-CS Emulsion Coating F-CS乳液弹性防水涂料的研制
Study on low temperature properties for F-CS emulsive elastic waterproof coating F-CS乳液弹性防水涂料的低温性能研究
On the principle of wear of water turbine transition parts, the new materials of repairing and protecting wear area, elastic coating of organic compound is studied and formed. 根据水轮机过流部件的磨蚀机理,研究了一种修复保护磨蚀区的新材料&有机复合弹性涂层;
The preparation, processing technology and operation application of modified silicone elastic decorative coating, which is a compound of silicone and polymer emulsion, are introduced in this paper. 利用有机硅乳液与有机高分子乳液复配,配制以有机硅改性的弹性装饰涂料。重点介绍其生产工艺和施工应用。
The result shows that both strength and elasticity of aqueous polyurethane elastic resin and its architectural waterproof coating are good and they are, new environmental protective building material with high performance. 研究表明,所制得的水性聚氨酯弹性树脂及其防水涂料强度高、弹性好,属于新型的高性能环保型建筑材料。
Through processing their load-displacement curves, the elastic modulus of HfB 2 coating was obtained, whose value is 188.78! GPa. 通过对测得的载荷&位移曲线进行处理,得到硼化铪涂层的弹性模量为18878GPa。
The effects of elastic modulus of the sprayed coating and crack size on stress intensity factor was analyzed. 分析了等离子喷涂层弹性模量对裂纹尖端应力强度因子的影响,以及裂纹尺寸对裂纹尖端应力强度因子的影响。
It integrates the fast curing polyurethane elastomer and the spray technology to realize the solventless high build elastic coating fast and easily, which will be a renovated approach for the development of new concept coatings product. 这种新技术将快固化聚氨酯弹性体与涂料喷涂技术相结合,实现了快速、方便地获得无溶剂厚涂弹性涂层的目的,并将带动一类全新涂料的发展。
The curves of hardness and elastic modulus across the coating are similar. 硬度和弹性模量在陶瓷层里分布具有相似性。
The oblique elastic impact friction model presented by Chen Danian is symmetrically simplified. With the simplified model, the friction coefficient between particle and elastic coating and its influence on the erosion rate of elastic coating are analyzed. 将ChenDanian等人提出的弹性斜冲击摩擦模型进行了对称简化,用简化模型分析了粒子对弹性涂层冲击过程中摩擦系数的变化规律及其对涂层冲蚀率的影响;